SainSmart Genmitsu · Open-frame router
PROVerXL 4030 V2
A compact, closed-loop ball-screw machine with a heavy steel frame and a 400 W spindle.
$1,399Spindle, bits and clamps included.
Work area400 × 300 mm
Spindle400 W
DriveBall screw (1204)
MetalLight aluminum, slowly
Will's take
Solid and precise, but newer machines have caught up on price.
The PROVerXL 4030 V2 was one of the first sub-$1,500 machines with ball screws and closed-loop NEMA 23s, and it’s still a stout little thing. The kit is complete — spindle, clamps, bits, Z-probe — and it’s fast for its size.
Its problem is the competition. The 400 W DC spindle is weaker than a trim router, and newer machines like the LUNYEE 3020 Nova and FoxAlien XE-Ultra Core offer rails and ball screws for similar or less money. Good machine, crowded spot.
— Will
What I like
- Ball screws and closed-loop motors
- Complete kit in the box
- Fast — 5,000 mm/min
What I'd watch for
- 400 W DC spindle is modest
- Roller-on-rail motion, not profile rails
- Limited expansion on V2
Spec sheet SainSmart Genmitsu PROVerXL 4030 V2
| Work area (X × Y × Z) | 400 × 300 × 110 mm 15.7 × 11.8 × 4.3 in |
|---|---|
| Spindle | 400 W DC spindle (48 V) up to 10,000 rpm |
| Drive | Ball screw (1204) |
| Linear motion | Steel rollers on rails |
| Frame | Steel & aluminum |
| Enclosure | No |
| Tool changer | Manual |
|---|---|
| Controller | GRBL 1.1h, closed-loop NEMA 23 |
| Software | Candle; works with Easel & Carveco |
| Metal | Light aluminum, slowly |
| Footprint | 29 × 19 in |
| Released | 2023 |
Also consider