Two Trees · Open-frame router
TTC450 Pro
A big 460 mm bed and an offline touchscreen for under $500 — powered by a small 775 motor.
$499Sale price; list $639.
Work area460 × 460 mm
Spindle72 W
DriveLead screw (T8)
MetalNot for metal
Will's take
A big bed on a tiny budget. The spindle is the bottleneck.
The TTC450 Pro gives you a lot of bed — 18 inches square — and an offline touchscreen for the price of a 3018 with upgrades. For engraving, V-carving signs and cutting thin plywood, that size is genuinely useful.
The weak spot is the 775 brushed motor and the slow 800 mm/min top speed. Deep cuts take a long time. Think of it as a large engraver that can also cut, and it makes sense.
— Will
What I like
- Large bed for the money
- Offline touchscreen controller
- Laser and rotary add-ons
What I'd watch for
- Weak 775 spindle
- Slow — 800 mm/min
- Light frame and lead screws
Spec sheet Two Trees TTC450 Pro
| Work area (X × Y × Z) | 460 × 460 × 80 mm 18.1 × 18.1 × 3.1 in |
|---|---|
| Spindle | 775 brushed DC spindle up to 30,000 rpm |
| Drive | Lead screw (T8) |
| Linear motion | — |
| Frame | Aluminum & stainless steel |
| Enclosure | No |
| Tool changer | Manual |
|---|---|
| Controller | GRBL, 3.5 in touchscreen |
| Software | GRBL senders, offline touchscreen |
| Metal | Not for metal |
| Footprint | 29 × 27 in |
| Released | 2024 |
Still confirming with Two Trees: spindle wattage.
Also consider